Scroll down for Nichol Plated, Composite, and Metric fittings
Click images to select sizes
Advantages -Quick disconnect (no tools), reusable, positive seal, versatile, secure tube retention, and self contained assembly.
Working Pressure -The fitting is suitable for use up to the maximum working pressure of the plastic tubing used. For soft copper tube, a maximum working pressure of 750 PSI is recommended. Also suitable for vacuum service.
Working Temperature --10°F to +200°F (other ranges available upon request.)
Pipe Thread -NPTF with Teflon based sealant pre-applied.
Temperature Range -0°F to +160°F (-53°C to +121°C) range at maximum operating pressures. (Refer to tubing temperature range.)
Material -Nickel plated brass.
Tubing -Nylon, Polyethylene, Polyurethane. For best results use 95 Durometer
Media -Compressed air, water
Push-In Fittings Nickel Plated
See Fastfittings Catalog pages 99-101
Brass Fittings
Union Connect
Reducer
Union Tee
Female Connector
Male Elbow
Male Connector
Swivel Elbow
Elbows
Union "Y"
Male Run Tees
Male Branch
Bulkhead
Double Male Union
Ball Valve
Working Pressure range -0-150 PSI (10 BAR) Vacuum. Min burst 340PSI (23BAR)
Working Temperature Range - -104°F to +180°F.
Material -The latest generation of composite material is used in the body construction in addition to brass on threaded components and stainless steel on the tube gripper.
Push-In Fittings Composite Body
See Fastfittings Catalog pages 102-105
Brass Fittings
Composite Union
Union Tee
Female Connector
Male Connector
Composite Elbow
Male Branch
Bulkhead
Elbows
Male Run Tees
Composite "Y" Connector
Needle Valve
Flow Control
Operating Range -
Pressure: 0 to 220 PSI (15 BAR)
Vacuum: 0 to 29hg (-99 BAR)
Temperature Range --5°F to +175°F (-20°C to +80°C)
Material -The latest generation of composite material is used in the body construction in addition to nickel-plated brass on threaded components and stainless steel on the tube gripper.
Login
